Troubleshooting Tips for Maytag Washing Machines

Maytag washing machines are known for their powerful performance and durability, which makes Maytag a trusted brand for many homemakers. However, any machine needs a little troubleshooting at some point for various reasons, and so is true for Maytag washing machines. Thankfully, there are some easy troubleshooting tips that are shared by the manufacturers themselves. Here are a few of those tips to follow before calling customer service for help.

Common issues

There are some common issues that arise while using the Maytag washing machine. These can be washer error codes, part replacement, washer making noise, and related things. Here’s a short guide on how to tackle some basic troubleshooting.

Maytag washer noise

If your machine is making noises which seem unfamiliar to you, then here are some things to check:

• The buckles or zippers in the pants or dresses may be touching the sides of the washer and making metallic noises. This could also happen due to the washer lids not being locked properly. This is normal and should be fine in a couple of minutes. However, make sure that no coins are left in the pocket that could be responsible for this noise.
• If you hear some humming or gurgling, then this is normal. The motor makes the noise during a wash cycle, and during different phases of the washing, it is possible to hear the water drain out and make gurgling sounds.
• When the machine starts to vibrate or rattle, it could be a sign that you have packed it with too many clothes. You can reduce the load and start the machine again. It is also possible that the floor might be unleveled.

Maytag washer draining error code

These error codes can be seen in the manual and matched in the guidelines. Here are things to check when this error code shows up:

• Check if the drain hose is clogged or bent. If it is, straighten the hose to allow for easy water flow, which will allow the machine to resume working. Also, check for clogs, which will have to be cleaned properly so there is no blockage for water.
• There are some minimum and maximum drainpipe height requirements when installing the washer. If the drainpipe is too high, it is possible that the washer may not be able to pump the water correctly. This means the water comes back into the washer every time it is tried to be pushed out.
• Sometimes, water can remain in the washer if the slow spin cycle is selected. To remove any excess water, select the high spin speed that helps drain the water out.

Maytag washer spinning error code

Some things to check before you call customer service are:

• It is possible that the spin cycle did not fully power up, and that is why it stopped. Try putting the spin instructions again and give it a go.
• Is the load unbalanced? Ensure there are just enough clothes in the washer and they are not tightly packed. If they are, the spin cycle will not work as fast as it should, resulting in wet clothes at the end.
• It is important that the washer is level. If not, it can lead to spin cycle issues, excess noise, and vibration. A quick check on the levels will eliminate this issue.

Maytag washer odor problems

A washing machine needs a deep clean, too, and when that is missed, it can lead to odor issues. Here are some simple tricks to troubleshoot this problem:

• There are some washing machine cleaning tablets available at most stores for the recommended cleaning cycle. However, some customers like to use their own DIY liquid cleaners, which also work.
• When the clothes are left in the machine for too long, they start to build a smell, so always unload the washer as soon as the washing is done.
• Use only just enough detergent when washing the load. Excess usage can lead to residue, which then starts to cause odors.

In cases where the other DIY troubleshooting tips do not solve the problem, refer to the detailed guidelines provided by the manufacturer. These guidelines are generally easy to understand and may help you solve the issue. However, sometimes, it is possible that a part needs replacement or other repair work by a professional. In this situation, contact the customer service, and they will assist you. You can either schedule a service online or call the number available on the official website to raise a request for servicing.

Before You Go

Three methods to promote safety at school How Aging Changes Your Sleep Patterns: Senior Living Read this before buying a dishwasher for your kitchen